28
Set the stitch selector at . Sew four (4) to six
(6) stitches. Stop sewing at a right stitch.
Set the stitch selector at . Sew until you
return to the start mark of the buttonhole. Stop
sewing at a right stitch.
Set the stitch selector at . Sew four (4) to six
(6) stitches. Stop sewing at a left stitch.
Remove the fabric and place a pin just before
the bartack at each end to prevent cutting
bartacks. Cut the opening with the buttonhole
opener.
NOTE:
When sewing a buttonhole at the edge of a
fabric, set the sliding buttonhole foot as
illustrated and sew in reverse [ ].
1
4
2
3
1
2
3
4
5
6
3
1
2
Buttonhole
Stitch selector:
Needle thread tension:
1 to 5
Presser foot:
Sliding buttonhole
foot
• Starting to sew
Attach the buttonhole foot. Carefully mark the
buttonhole length on the fabric.
Place the fabric under the foot, with the button
hole marking running toward you.
Move the slider (A) toward you so the top mark
(C) on the slider aligns with the start mark (B).
Lower the presser foot.
Set the stitch selector at . Sew forward until
you reach the front mark of your buttonhole. Stop
sewing at a left stitch.
1
SECTION 5. BUTTONHOLES
1
4
2
3
3
4
2
1
2
3
3
2
1
4
2
3
1
4
2
4
2
(A)
(B)
(C)
With the buttonhole foot raised, hook the filler cord on
the spur at the back of the buttonhole foot.
Bring the ends toward you under the buttonhole foot,
clearing the front end.
Hook the filler cord into the forks on the front of the
buttonhole foot to hold them tight.
Spur
Forks
Sew the buttonhole over the cord in the same
procedure as above.
Remove the fabric from the machine and cut the
sewing threads only.
Pull the left end of the filler cord to tighten it.
Thread the end through a darning needle, draw to the
wrong side of the fabric and cut.
1
2
3
Corded Buttonhole
1
2
1
2
1
2
3
4
5
6
Summary of Contents for Hello Kitty
Page 2: ......
Page 3: ...1 ...
Page 45: ...Instruction Book Libro de Instrucciones Livre D Instructions ...
