66
7.
Mail Address: Enter the receiver's e-mail address. This is the address you want the e-mail alerts sent to.
Ex:
admin@sansdigital.com
.
8.
According to your requirement, set the corresponding event level:
•
Disable Event Notification: No event notification will be sent.
•
Urgent Error Notification: Send only urgent events.
•
Serious Error Notification: Send urgent and serious events.
•
Warning Error Notification: Send urgent, serious and warning events.
•
Information Notification: Send all events.
•
Notification For No Event: Notify user if no event occurs within 24 hours.
•
SNMP Traps Configuration: This section discusses how to enable the SNMP traps on your RAID storage, and
how to control the sending of SNMP traps from the ArcHTTP. To send the SNMP traps to client SNMP
manager such as Net-SNMP manager using the IP address assigned to the operating system, you can simply
use the SNMP function on the ArcHTTP. The ArcHTTP only provides one direction to send the trap to the
SNMP manager without needing to install the SNMP extension agent on the host. If SNMP manager
requests to query the SNMP information from RAID storage, please refer the Appendix D "SNMP Operation
& Installation".
•
To set up SNMP traps sending function, click on the “SNMP Configuration” link. SNMP Traps Configurations
are set up on this page. This setup screen is shown as below:
The following article describes a best practice methodology for setting this up in the “SNMP Traps Configurations”.
1.
SNMP Trap Configurations: Enter the SNMP trap IP address.
2.
SNMP System Configurations: Community name acts as a password to screen accesses to the SNMP agent of
a particular network device. Type the community names of the SNMP agent in this field. Most
network devices use “public” as default of their community names. This value is case-sensitive.
3.
SNMP Trap Notification Configurations: Event Notification Table refers to Appendix E. Before the client
side SNMP manager application accepts the RAID storage traps, it is necessary to integrate the MIB into the
management application’s database of events and status indicator codes. Ensure the compilation process
successfully integrates the contents of the .mib file into the traps database. Please refer to Appendix D of
Summary of Contents for ES208X12HP
Page 1: ......
