22
Cinema Wide1 picture size (for 4:3 format
programs)
To fill the screen, the right and left edges are
extended,
however; the center of the picture remains near its
former ratio.
The top and bottom edges of the picture may be
hidden.
Cinema Wide2 picture size (for letter box
programs)
The entire picture is uniformly enlarged—it is
stretched the same amount both wider and taller
(retains its original proportion).
The top and bottom edges of the picture may be hidden.
A B C D E F G - - - - - - - - - - - - - - - -
Cinema Wide3 picture size (for letter box
programs with subtitles)
To fill the width of the screen, it is extended
horizontally. However; it is only slightly extended at the
top and the bottom.
The top and bottom edges of the picture may be hidden.
A B C D E F G - - - - - - - - - - - - - - - -
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -
Full picture size (for 16:9 source programs)
Full will display the picture at the maximum size.
NOTE:
Some High Definition and/or Digital broadcasts may
not allow you to change the picture size.
In COMPONENT mode with a scanning rate of
720p or 1080i, only the Cinema Wide2 and Full
picture size features are available.
In PC Mode, only the Natural and Full picture size
features are available. Additionally this feature will
not work when display mode is WXGA.
In Cinema Wide2 picture size, some of the on
screen display items may be positioned off the
visible portion of the screen.
•
•
•
•
Film Mode
A smoother motion may be obtained by setting
the Film Mode to “On”.
1
Press
MENU
. The menu screen will appear.
2
Press
or
to select “Picture”, then press
or
ENTER
.
3
Press
or
to select “Film Mode”.
Press or to select “On” or “Off”.
PC Setting
>>
DNR
On
Picture
Picture Setting
>>
Picture Preference
Sports
Picture Size
>>
Film Mode
On
: Adjust
: Select
4
Press
EXIT
to return to the normal screen.
NOTE:
This feature can work only in 480i.
This feature will not work in PC mode.
•
•
Picture control
adjustment in the PC mode
You can adjust to optimize the performance of
the TV in the PC mode.
1
Press
INPUT
, then press
/
or
Number
button (3)
to select the PC mode.
2
Press
MENU
. Then press
or
to select
“Picture” , then press or
ENTER
.
3
Press
or
to select “PC Setting”, then press
or
ENTER
.
Ver Position
Clock
Phase
: Adjust
25
0
25
PC Setting
Hor Position
25
: Select
ENTER:Set
4
Press
or
to select the desired item you
want to adjust.
5
Press or to adjust the setting.
Hor
Position:
To adjust the horizontal position of
the image on the PC mode.
Ver
Position:
To adjust the vertical position of the
image on the PC mode.
Clock:
To minimize any vertical bars
or stripes visible on the screen
background.
Phase:
This must be adjusted after the
frequency of the PC mode has
been set to 60Hz to optimize
picture quality (page 14).
34C1121B.indb 22
34C1121B.indb 22
8/5/08 1:26:08 PM
8/5/08 1:26:08 PM
Downloaded from
www.Manualslib.com
manuals search engine
