background image

21

Audio cord (not supplied)

VGA cable (not supplied)

To connect the Plasma TV to a PC (Personal Computer)

Before you connect this Plasma TV to your PC, change the adjustment of your PC’s Resolution and Refresh
rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the
VGA connector PC MONITOR on the back of the Plasma TV. Attach the connectors firmly with the screws on
the plug. In case of a Multimedia computer, connect the audio cables to the audio outputs of your Multimedia
computer and to the AUDIO L and R connectors of the PC AUDIO / HDMI-1 AUDIO (L/R) IN jacks of the
Plasma TV.
Press 

INPUT SELECT

 on the remote control to select PC mode.

Switch on the computer. The Plasma TV can operate as the computer monitor.

Monitor Display modes

MODE

Resolution

Refresh rate

VGA

640x480

60Hz

WVGA

848x480

60Hz

SVGA

800x600

60Hz

XGA

1024x768

60Hz

WXGA

1280x768

60Hz

WXGA

1280x720

60Hz

To return to normal mode

Press 

INPUT SELECT

 again.

Rear lower of the Plasma TV

To PC AUDIO/HDMI-1

AUDIO (L/R) IN jacks

To PC IN

NOTES:

The on-screen displays will have a different appearance in PC mode than in TV mode.

When you select WXGA or WVGA mode, see the WXGA INPUT or WVGA INPUT to ON in the PC
PICTURE menu (see page 49).

Connections to other equipment

 3X81001A_En_p14-21

06.8.22, 4:10 PM

21

Summary of Contents for HDPDP5050

























































Reviews: