STEP 2
：
Burning steps
1. Load the burning file
：
open the ISP_Tool
，
and click “Read”
，
it will popup a interface as
shown. Click “HDCP”, choose the “009000.bin” file. Make sure the HDCP Key Allocation is
，
and
then type
“
0x3B0000” in the blank. Click
,lock the
。
At last, click “Run(F8)”,it will start
burning:
2.
Serial minutes it will show PASS, that means burning is successful, otherwise, please pitch on
the “Run(F8)” button once again, do not need to cut off.
