Sansui SLED2228, Owner'S Manual

10

Remote control

2

10

5

1

6

14

4

17

3

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

2. Install two “AAA” batteries (supplied).

3. Replace the battery compartment cover.

Before using the remote control, batteries must first be installed.

Use two “AAA” size batteries. The batteries may last 

approximately one year depending on how much the 

remote control is used. For best performance, it is 

recommended that batteries should be replaced on a 

yearly basis, or when the remote operation becomes 

erratic. Do not mix old and new batteries or different 

types. 

BATTERY PRECAUTIONS

These precautions should be followed when using 

batteries in this device:

Use only the size and type of batteries specified.

Be sure to follow the correct polarity when 

installing the batteries as indicated in the battery 

compartment. Reversed batteries may cause 

damage to the device.

Do not mix different types of batteries together (e.g. 

Alkaline and Carbon-zinc) or old batteries with fresh 

ones.

If the device is not to be used for a long period of 

time, remove the batteries to prevent damage or 

injury from possible battery leakage.

Do not try to recharge batteries not intended to be 

recharged; they can overheat and rupture. (Follow 

battery manufacturer’s directions.)

•

•

•

•

•

1.

(POWER) Button 

-

 Used to turn the power 

on/off to the TV.

2.Direct Channel Selection Buttons (0

-

9) 

-

 Allows 

direct access to any channel of the TV.

3.

–

 Button 

-

This button is the “–” button used when 

selecting digital channels.

4.SLEEP Button 

-

 To set the TV to turn off after a 

preset amount of time, use the 

SLEEP

 button on 

the remote control.

5.CH (CHANNEL) + / 

–

 / CURSOR 

 / 

Buttons

-

 Used to operate the menu functions of 

the TV, and to change the channels of the TV.

6.MENU Button 

-

 Use to display the On-Screen 

menu function.

7.RESET Button 

-

 Press to reset the On-Screen 

picture adjustments to their factory preset positions.

To use this function, select “Picture” or “Audio” in 

the menu screen, then press this button.

8.INPUT SELECT Button 

-

 Use to change the 

external input.

9.PICTURE SIZE Button 

-

 Used to change the 

picture size.

10.RECALL Button 

-

 This button allows you to go 

back to the previous channel selected by just 

pressing the 

RECALL

 button. Press this button 

again to return to the channel you were watching.

11.MUTE Button 

-

 To turn off the sound, press this 

button once. The TV will be silenced and the 

symbol “Mute” will appear on the screen. The 

muting feature can be released by pressing the 

MUTE

 button again or one of the 

VOL (VOLUME)

+

 or 

–

 buttons.

12.VOL (VOLUME) + / 

–

 / CURSOR   /   Buttons 

-

 Used to operate the menu functions of the TV. 

Press the

button to increase, or the

 button to 

decrease the sound level.

13.ENTER Button 

-

 Use to enter or select 

information for On-Screen operations.

14.EXIT Button 

-

 Press to remove setup menu.

15.CCD Button 

-

 Used to display the Closed Caption 

menu screen.

16.DISPLAY Button 

-

 When you press this button, 

the current information will be displayed on a 

screen. To remove the display from the screen, 

press this button again.

17.AUDIO Button 

-

 Change soundtrack language.

8
9

7 

11
12

13

15

16

3FS0121A.indb   10

3FS0121A.indb   10

2/15/11   5:32:24 PM

2/15/11   5:32:24 PM