Sansui SLED4280, Owner'S Manual

15

ENGLISH

Starting setup

The Auto Setup menu appears the first time you 

turn on the TV, and assists you to specify the 

Air/Cable setting, and program your channels 

automatically.
IMPORTANT: Make sure that the antenna or cable 

TV system connection is made!

1

To turn on the TV, press   

(

POWER)

 (POWER 

indicator on the front of the unit changes blue. It 

may take approx. 10 seconds for a picture to appear 

on screen.). The Auto setup function begins. 

Automatic Search

Start

This unit has been preset to STORE brightness
This setting does not qualify under ENERGY 
STAR. To reduce brightness and energy 
consumption, change setting to ‘HOME’. This 
setting does qualify under ENERGY STAR.

Auto Setup

TV Location

Store

: Adjust

: Select

Signal Type

Cable

2

Press 

▲

 or 

▼

 to select “TV Location”, then press 

◀

 or 

▶

 to select “Store” or “Home”. This product 

qualifies for ENERGY STAR in Home mode 

default setting.

NOTE:

This unit has been preset to STORE brightness. 

This setting does not qualify under ENERGY 

STAR. To reduce brightness and energy 

consumption, change setting to ‘HOME’. This 

setting does qualify under ENERGY STAR.

The device may not conform to the ENERGY 

STAR standard after Reset is performed or the 

Backlight is adjusted.

•

•

3

Press 

▲

 or 

▼

 to select “Signal Type”, then press 

◀

 or 

▶

 to select “Cable” or “Air”.

4

Press 

▲

 or 

▼

 to select “Automatic Search”, then 

press 

▶

 or 

ENTER

. 

5

Now the “Auto Setup” starts. After the auto setup 

is completed, the TV channel appears on the 

screen.
• Depending on the reception condition, it may 

take from 15 minutes to 30 minutes to complete 

memorizing digital cable channels. Please be patient.

NOTE:

If you press 

EXIT 

in the process of “Auto Setup”, 

the Auto Setup stops and changes to the normal 

screen.

When you make a menu selection, your changes 

occur immediately. You do not have to press 

EXIT 

to 

see your changes.

TV operation

1

To turn on the TV, press   

(

POWER)

.

(POWER indicator on the front of the unit 

changes blue. It may take approx. 10 seconds for 

a picture to appear on screen.)

2

Adjust the volume level by pressing 

VOL (VOLUME) 

+

 or 

–

 . The volume level will be indicated on 

the screen by blue bars. As the volume level 

increases, so do the number of bars. If the 

volume decreases, the number of blue bars also 

decreases.

•

•

3

Set the Signal Type option to the appropriate 

position (see “Air/Cable selection” on page 18).

4

Press the 

Direct Channel Selection (0

-

9, 

–

)

buttons to select the channel.

(If you press only channel number, channel 

selection will be delayed for a few seconds.)

TO SELECT ANALOG CHANNELS

1-9: 

Press 1-9 as needed. Example, to select 

channel 2, press 

2

, then press 

ENTER

.

10-99: 

Press the 2 digits in order. Example, to 

select channel 12, press 

1

, 

2

, then press 

ENTER

.

100-135:  Press the 3 digits in order. Example, to 

select channel 120, press 

1

, 

2

, 

0

, then press 

ENTER

.

TO SELECT DIGITAL CHANNELS

Press the first 1-3 digits, then press the 

–

button, 

followed by the remaining number.

Example, to select channel 15-1, press 

1

,

 5

,

–

, 

1

, 

then press 

ENTER

.

If a channel is selected with only audio content, 

“Audio only” will be displayed on the screen.

If a channel is selected with a weak digital 

signal, “Digital channel signal strength is low”  

will be displayed on the screen.

  The same program may be available on either 

an analog channel or a digital channel. You may 

choose to watch either format.

If a channel is selected to which you have not 

subscribed, “Digital channel is encrypted” will 

be displayed on the screen.

•

•

•

VHF/UHF/CABLE CHANNELS

Air

Cable

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) 

(W)

37-59 (AA) 

(WW)

60-85 (AAA) 

(ZZZ)

86-94 (86) 

(94)

95-99 (A-5) 

(A-1)

100-135 (100) 

(135)

01 (4A)

NOTE:

If a channel with no broadcast is selected, the 

sound will automatically be muted.

It may take a few seconds for a digital channel 

picture to appear on screen after being selected.

To select the video input source

To view a signal from another device connected to 

your LCD TV, such as a VCR player, press

 INPUT 

SELECT

, then press 

▲

 or 

▼

 or corresponding 

Number buttons (0

-

7)

, then press 

ENTER

. You 

can select TV, Video1, Video2, Component, HDMI1, 

HDMI2, HDMI3 or PC depending on which input jacks 

you used to connect your devices.

Input Select

1.Video1

2.Video2

3.Component

4.HDMI1

5.HDMI2

6.HDMI3

7.PC

[0-7]:Select

0.TV

CH  /  

Press and release 

CH  /

. The channel automatically 

stops at the next channel set into memory.

For proper operation, before selecting channels, they 

should be set into the memory. See “Memorizing 

channels” on page 18.

•

•

3CQ0821B_En.indd   15

3CQ0821B_En.indd   15

10/7/10   4:37:23 PM

10/7/10   4:37:23 PM