Sansui SLED4280, Owner'S Manual

19

ENGLISH

Clear All

All channels are deleted from the channel memory.

1

Select “Channel”, then press 

▶

 or 

ENTER

.

2

Press 

▲

 or 

▼

 to select “Add/Delete”, then press 

▶

or 

ENTER

.

3

Press 

▲

 or 

▼

 to select “Clear All”, then press 

▶

 or 

ENTER

.

Add/Delete

>>

Add/Delete

Adding Channel

>>

: Select

ENTER:Set

Clear All

>>

Checking the digital 

signal strength

This TV will allow you to view the digital signal 

meter for digital channels. 

1

Select “Channel”, then press 

▶

 or 

ENTER

.

2

Press 

▲

 or 

▼

 to select “DTV Signal”.

3

Press 

▶

 or 

ENTER 

to

check the digital signal 

strength.

The digital signal strength screen will appear.

If necessary, adjust the direction of the antenna to 

obtain the maximum signal strength.

Signal Level

0 50 

100

DTV Signal

NOTE:

Signal meter feature is not available for analog 

channels.

After 240 seconds, DTV Signal screen will return to 

normal TV-operation automatically.

•

•

Labeling channels

Channel label appear with the channel number 

display each time you turn on the TV, select a 

channel, or press DISPLAY.

You can choose any four characters to identify a 

channel.

To create channel labels

1

Select “Channel”, then press 

▶

 or 

ENTER

.

2

Press 

▲

 or 

▼

 to select “Ch Label”, then press 

▶

or 

ENTER

.

The Ch Label menu will appear.

3

Press 

◀

 or 

▶

 to select a channel you want to 

label, then press 

▼

.

Ch Label

Label Clear

>>

: Adjust

Ch Label

Channel Number

15-1

: Select

4

Press 

◀

 or 

▶

 repeatedly until the character you 

want appears in the first space.

Label Clear

>>

: Adjust

Ch Label

Channel Number

15-1

: Select

Ch Label

A

ENTER:Set

The characters rotation as follows:

SPACE

-

      , () @ / + = 

-

If the character which you desire appears, press 

ENTER

.

Repeat this step to enter the rest of the characters.

If you would like a blank space in the label name, 

you must choose the empty space from the list of 

characters.

5

Repeat steps 3-4 for other channel. You can 

assign a label to each channel.

6

When you finish inputting the label name, press 

EXIT 

to return to the normal screen.

To clear a Ch Label

After step 3 above, press 

▲

 or 

▼

 to select “Label 

Clear”, then press 

▶

 or 

ENTER

.

NOTE:

The channel labels will be reset after “Automatic 

Search” on page 18.

Labeling video inputs

The Video Label feature allows you to label each 

input source for your TV.

1

Select “Setup”, then press 

▶

 or 

ENTER

.

2

Press 

▲

 or 

▼

 to select “Video Label”, then press 

▶

 or 

ENTER

.

3

Press 

▲

 or 

▼

 to select an input which you want to 

label.

4

Press 

◀

 or 

▶

 to select the desired label for that 

input source.

Video2

-

Component

-

HDMI1

-

HDMI2

-

HDMI3

-

Video Label

: Adjust

: Select

Video1

-

– 

: Uses the default label name

VCR

: Video cassette recorder

DVD

: DVD video

DTV

: Digital TV set-top box

SAT

 : 

Satellite 

box

CBL

: Cable box

HD

: HDMI device (only for HDMI inputs)

•

3CQ0821B_En.indd   19

3CQ0821B_En.indd   19

10/7/10   4:37:25 PM

10/7/10   4:37:25 PM