Page | 16
© Sansui UK 2012 WLD+201 IB Ver 1.0 Rev 0.0
7.
Getting Started
Although the Sansui WLD+ 201 is sophisticated, getting
started is simple. After connecting your system to the
speakers, to play DAB or FM radio, all you need is a
power source (a 220~240 V mains supply).
For Music Player mode, you need either a USB stick
containing compatible music files or a wired or
wireless Ethernet network and a UPnP music server
(e.g. a PC or a network attached storage (NAS) drive
containing your music library). For Internet-connected
modes such as Internet radio you also need a
broadband Internet connection.
Setup wizard
When the WLD+ 201 is started for the first time, it runs
through a setup wizard to configure settings for
date/time and network. Once this has finished, the
system is ready to use in most modes.
Note: To change these settings later, select
Menu > System settings >
.
To run the setup wizard again, select
Menu >
System settings > Setup wizard
.
Select
Yes
to start the setup wizard.
If you choose
No
, the next screen asks if you would like
to run the wizard next time The WLD+ 201 is started.
The system then starts without configuring time/date
and network settings and enters the Main Menu.
Note: If power is removed while the wizard is in
progress, the wizard will run again next time the WLD+
201 is started.
12/24 hour display
To change between 12 and 24 hour display, select
Set
12/24 hour
and then select your preference.
Time/date
The time and date can be updated manually or
automatically. With auto-update, the time and date
are automatically synchronised with external clocks.
Auto-update is generally more accurate.
Auto-update
Auto-update works with data sent over DAB, FM or the
Internet. The clock is only updated when in a
corresponding mode, so it is best to select a mode
you use regularly.
DAB
and
FM
use time signals
broadcast with radio transmissions.
Network
uses a time signal sent from the vTuner
Internet radio portal when in any network connected
mode.
1.
Select
Update from DAB
,
Update from FM
,
Update from Network
or
No update
.
2.
If you are updating from the network, set
your time zone.
3.
If your country uses daylight saving, the
automatically updated time from the
network may be wrong by one hour. When
daylight savings are in effect (during the
winter), turn on the
Daylight savings
option
to rectify this. Note that if you are updating
the time from DAB or FM, the
Daylight
savings
option has no effect on the clock’s
time. The WLD+ 201 will auto-update from
the selected source when time information is
available.
