VERIFY WALL OUTLET IS CORRECT VOLTAGE AND AMPERAGE.
9
A. REPLACEMENT FILTER: Change the filter every 3 to 6 months or when the filter is visibly dirty.
PN 4037722 MERV-13 Filter
PN 4037731 MERV-13 Filter, 4-Pack
PN 4037732 MERV-13 Filter, 12-Pack
B. HANG KIT: Recommended for hanging the dehumidifier overhead.
PN 4036695 Hang Kit
C. PUMP KIT: Allows for draining and transferring water when the unit is not hard plumbed or near a drain.
PN 4022220 Condensate Pump
11
ACCESSORIES
FOR ADDITIONAL PRODUCT INFORMATION OR TO PURCHASE ADDITIONAL ACCESSORIES FOR YOUR SYSTEM, VISIT
SANTA-FE-PRODUCTS.COM
NEED HELP? CALL US AT (800) 533.7533 OR VISIT US AT SANTA-FE-PRODUCTS.COM
A. ATTACH A P-TRAP (AVAILABLE AT MOST HARDWARE STORES).
B. IF YOU NEED WATER TO TRAVEL A FURTHER DISTANCE, SEE SECTION 12 BELOW ON HOW TO ORDER A PUMP KIT.
C. SEE MANUAL FOR MORE DETAILS. MANUAL CAN BE FOUND AT SANTA-FE-PRODUCTS.COM.
OUTPUT TO DRAIN.
8
EXTERNAL CONTROLS ARE REQUIRED, SEE SECTION 12 BELOW ON HOW TO ORDER.
PLUG IN UNIT.
COM
NC
COMP
24V
NO
COM
ON-D
OFF-D
AC
OPTIONAL
OPTIONAL
DMPR
NC
VENT
DAMPER
DEH-3000
FAN
NC
FLOAT
SWITCH
COM
FAN
24V
DEHU
DMPR
*
ULTRA SERIES DEHUMIDIFIER
YELLOW WIRE
MUST BE
BROKEN TO
INSTALL FLOAT
SWITCH
COM
COM
NC
COMP
FAN
24V
24V
NO
COM
ON-D
OFF-D
AC
DEHU
FLOAT
FLOAT
OPTIONAL
OPTIONAL
DMPR
ULTRA SERIES DEHUMIDIFIER
DEH-3000
FAN
NC
VENT
DAMPER
JUMPER MUST
BE REMOVED
IF USING
FLOAT SWITCH
NC
FLOAT
SWITCH
OPTIONAL
NC
FLOAT
SWITCH
24V
DEHU
ULTRA SERIES DEHUMIDIFIER
BREAK WIRE
TO INSTALL
FLOAT SWITCH
2 Wire Control
10
120
98
98
120
DOES REQUIRE A DEDICATED 120V 15 AMP CIRCUIT.
STOP
DO NOT RETURN TO RETAILER. FOR SERVICE OR TROUBLESHOOTING USE THE CONTACT INFORMATION BELOW.
