User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
_____________________________________________________________________________
- 12 -
3. Menu/ESC-button
:
Menu:
Press this button to display the main menu screen.
ESC :
Press this button to exit the menu without saving.
4. Enter/10+ button
:
Enter :
Press this button to save menu settings or to select channels over
10.
Example: Press this button and then „6“ to see channel „16“.
5. Quad/Plus button
:
Press this button to display the cameras in multi-screen mode.
This button is also used to switch channels or to increase values in the setup
menu.
6. Channel/numeric buttons:
Press these buttons to enter data and to make selections, e.g. enter the numeric
code when prompted for a password, channel selection or date selection in
schedule option mode.
Use the minus button [-] and the plus button [+] to decrease or increase the
settings or channels.
7. Remote control signal receiver:
Do not block the receiver port on the recorder. Doing so may cause the remote
control to function improperly.
8. Power button
:
Press this button to turn on the recorder (the LED lights up). Press it again to turn
off the recorder (the LED goes off).
9. USB port
:
This USB port allows you to connect memory sticks to backup video data.