User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
_____________________________________________________________________________
- 28 -
Time & date setting:
When the DVR is powered on for the very first time, please enter the correct date and
time.
Use the mouse or the direction buttons to selec the „Time“ tab in the system menu.
Enter the date and time using the numeric buttons on the remote control or the
„-
/+“ buttons on the recorder’s front panel. Alternatively, use the mouse.
Press ENTER to save your entries and to exit the menu. Alternatively, click
„SAVE“.
Press ESC to exit the menu without saving the entries. Alternatively, close the
window by clicking on the cross.
Note:
If the recorder is in recording mode, you cannot change the date and time. You first have
to stop the recording to be able to edit the date and time.
Once you have adjusted the date and time, press REC to continue with the recording.
Selecting the OSD language:
By default, German is selected as OSD language. You can change the language. Go to
System > General and select your langauge (also see chapter 7.8.1).
