User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
_____________________________________________________________________________
- 31 -
5.2 Multi-screen display and sequencing
5.2.1 Screen display
Select any camera for full screen display by pressing the number button of the desired
camera. Alternatively, double-click on the camera window to display it as full screen.
Double-click again to close the full screen.
5.2.2 Multi-screen display and switch sequencing display
1. Press the [DISPLAY]
button to activate the multiscreen display. It changes the
order as defined in the SPLIT MODE.
2. To start auto sequence, press the [DISPLAY] button for 2 seconds to begin full
screen sequencing.
Click on the icon . The virtueal keybad appears.
3. The sequence mode and dwell times are programmable. For detailed information
about configuring those, see chapter 7.1.2). If the sequence mode is not
activated, it moves to quad mode instead of sequencing.
Auto sequence status
Auto sequence
Split mode
Spot monitor
Main monitor
