User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
_____________________________________________________________________________
- 35 -
6. OPERATION
6.1 Login/Logout
You must log on to the DVR with valid password to operate the DVR. By factory default,
it comes with the login
account “ADMIN” and the default password “000000”.
Note:
If you are logging on for the first time, the system does not prompt you to change the
default password. Therefore, it’s strongly recommended to change the password when
you install the DVR (also see chapter 7.8.3).
Login:
1. On the front panel or the remote control, press the [POWER] button.
2. When the DVR is powered on, it will start to scan the its status.
3. The live viewing screen will appear after initialisation after about 50 sec. It can be
delayed if you have a defect HDD. In this case it will try to fix it for logical
problems but it will show you a warning message to indicate a physical problem.
4. On the front panel or the remote control, press the [LOGIN] button. Using the
mouse, click the login icon.
5. The login icon
will be displayed on the status bar.
Logout:
On the front panel or the remote control, press the [LOGIN] button. Using the mouse,
click on the login icon.
