User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
_____________________________________________________________________________
- 46 -
7.3. Record
7.3.1 General
1. The menus are displayed with options on the left-hand column and settings in the
right hand column. A cursor (highlighted menu) can be moved using the direction
buttons [
] .
2. Change the below options using the [ - + ] buttons.
Schedule use:
This enables or disables the night zone. By default it is set to
“OFF”.
Bootup record:
It starts recording without press
ing [REC] button when it set “ON”.
Disk overwrite:
Select the record policy of the hard disk drive.
- ON: By default, the hard disk drive will overwrite from the beginning
when it becomes full (ring buffer).
- OFF: It stops recording after HDD is full.
Auto delete:
Allows you to configure when the DVR automatically deletes all data from
the HDD. You can choose from the following options.
None
12 hours
1 day - 6 days
1-4 weeks-> 30 days
Pre-record:
Determines how long the recording prior to an event should last:
5-300 sec. By default it is set to 5 sec.
Post- record:
Determines how long the recording after to an event should last:
5-300 sec. By default it is set to 10 sec.
Note:
The alarm/motion recording will be extended if there is another
alarm/motion detection during the event recording.
