User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
_____________________________________________________________________________
- 49 -
7.3.3 Continuous recording
The DVR comes with certain preset settings from the factory. Therefore once the DVR is
installed, immediate recording is possible after pressing the [REC] buttons By default,
audio alarm and motion recording are OFF.
The DVR records video data continuously over a 24 hour period. Different settings can
be configured for each camera. To copy the setting from one channel to another, press
the [Display] button.
Item
Adjustment
RES
Indicates the selected resolution.
AUDIO
Select whether audio data should be recorded.
F/S
Select the recording speed for each camera.
QUALITY
Specify the picture quality of the recording for each camera.
ultra
super
high
middle
low
Continuous recording may be done at the same time as event recording. The DVR
records video data for 24 hours. If, however, an event occurs, the recording speed and
the picture quality can be set differently as the continuous recording.
Example:
If you press the [REC] button, normal recording
starts with a high picture quality of 3 fps. If an event
is triggered on this channel, the recording speed is
increased to max. 25 fps. As soon as the event is
over, the normal recording continues.
Note:
Please define the event source (motion, alarm, video loss) in the “Day event” tab.
