User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
_____________________________________________________________________________
- 59 -
7.5.2 Recording disk (HDD)
This information lists the installed drives and their respective capacities which are
currently used for recording.
1. Size, range:
It displays the currently recorded data size, the HDD size, the stored data range and
the status of the recording.
2. Device:
It displays whether the HDD is master or slave for mirroring. The upper device is the
master and the other one is the slave. Once the slave HDD is 100% synchronised,
the master HDD can be removed.
3. Status:
Stable:
The HDD is in stable status.
Re-sync:
All pending buffered data are copied to a new drive.
Recover:
All pending buffered data are copied to a slave drive.
4. Action Remove HDD.
The dialogue box
“Are you sure?” opens.
Press the up/down [
] buttons to
select “YES” or “NO”, then press the [-, +]
button or use the mouse to confirm your selection.
