User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
_____________________________________________________________________________
- 68 -
DYNDNS:
To use your own domain name service or
“dyndns.com”
The following settings are only needed if you are NOT using the
“Default” mode:
a.)
Domain name:
Enter the name you have used for the DDNS web configuration.
b.)
User ID:
Enter your user ID.
c.)
Password:
Enter your password.
d.)
Update test:
Click the update test button to confirm the connection. A success
message will appear.
To save changes and exit the menu, press the [MENU] button.
To exit the menu without making changes, press the [CANCEL] button. Alternatively,
close the window by clicking the cross.
Note:
Please write the password in capital letters (small letters are automatically changed to
capital letters).
7.6.6 Host List
(only for LMX series)
At” Network -> General” select “Allowed” in the “Access host” field. The above host list
comes up. Here you can enter the IP addresses of the computers which are allowed or
not allowed (denied) to access the DVR.
