User manual
SanStore-4LEMX / SanStore-8LEMX / SanStore-16LEMX
SanStore-4LMX / SanStore-8LMX / SanStore-16LMX
_____________________________________________________________________________
- 84 -
Tour Group
A pre-defined tour group allows a camera to move through a programmed sequence of
PTZ presets.
1) Communication settings.
Configure the appropriate camera model by entering the ID and the corresponding
Baud rate. Please also refer to the PTZ camera manufacturer
’s instruction manual for
proper settings.
2) Tour:
There are 4 programmable tours. Using the [ - + ] button to choose a tour:
[Group 1
Group 2
Group 3
Group 4]
3) Tour settings:
a. Group list: Each tour group consists of up to 10 preset position.
b. Preset number: Enter the start and end of a preset for the group.
c. Dwell time: Set the pause between end of current preset and the start of the next
preset.
d. Change: Add, modify or clear the tour list.
e. Repeat steps b) to d) for any additional tour.
