User manual SanStore-4EM / SanStore-8EM
_________________________________________________________________________________
- 18 -
5.LIVE VIEWING
5.1. Display overview
(1) (2) (3)
Event indicator
(1)
Alarm: The alarm has been triggered. Press the [CANCEL / ESC] button on the
recorder or the [CLR] button on the remote control to hide the alarm indicator.
(2)
Motion detection: A motion has been detected. Press the [CANCEL / ESC] button on
the recorder or the [CLR] button on the remote control to hide the motion detection
indicator.
(3)
Video
loss: Video loss during recording. Press the [CANCEL / ESC] button on the
recorder or the [CLR] button on the remote control to hide the video loss indicator.
Status bar
(1) Indicates that the built-in Cd/RW is connected. It changes to blue while in backup
mode.
(2) Indicates that a USB device is connected on front panel.
It changes
to blue while it’s
doing backup.
(3) Indicates that a recording is in process.
(4) Indicates that a schedule is active. During recording it turns blue.
(5) Indicates that audio
data is stored. During playback it turns blue.
(6) Indicates the number of users in the network (max. 3).
Status bar
Displays the date, day of the week and time.
Status bar
Displays the remaining recording time of the DVR. If the remaining HDD capacity is less than
4 GB, this blue “recycling” icon will light up.
Recording
mode
Event
indicator
Camera number
and title
Stauts bar
1 2 3 4 5 6
