User manual SanStore-4EM / SanStore-8EM
_________________________________________________________________________________
- 27 -
6.3 Camera setup
Procedure:
Use the direction buttons [
] to select „camera“. Then press [ENTER] to
confirm.
Use the left/right buttons [
] or the numeric buttons to select the camera you wish
to configure.
Use the down button [
] to select an item.
Use the [ - + ] buttons to change the values.
ITEM
DEFAULT
ADJUSTMENT
COVERT
No
If the covert mode is
set to “YES”, the selected camera is invisible
from all live displays, playback and network while continuing to
record. Covert cameras are viewable after changing the setting to
“NO” .
BRIGHTNESS
50%
The brightness of each camera can be adjusted by pressing the
[-,+] buttons.
CONTRAST
50%
The contrast of each camera can be adjusted by pressing the
[-,+] buttons.
COLOR
50%
The color of each camera can be adjusted by pressing the
[-,+] buttons.
CAMERA TITLE
Camera
number
A combination of 12 digits and alphabets can be entered to label
each camera. Press the appropriate numeric button to type
thecamera title
. It’s up to 12 characters (also see chart on next
page)..
P/T/Z MODEL
None
Select the P/TZ camera model to be controlled.
P/T/Z ID
Camera
number
Select appropriated channel for t
he PTZ camera. “Camera ID”
means “camera address”.
Press [ENTER] to save the changes and to exit the menu.
Press [CANCEL] to exit the menu without saving the changes.
