User manual SanStore-4EM / SanStore-8EM
_________________________________________________________________________________
- 50 -
6.9.4 Disk
ITEM
ADJUSTMENT
FORMAT
1. Stop the DVR completely before formattin the disk.
2. Use the [-, +] buttons to change the select device:
Internal HDD, RACK-CD/RW or DVD RW, USB (front), USB (rear)
3. Use down button [
] to go to
, then press the [- + ] button to
start formatting.
4. The formatting will begin, and the progress will be displayed at the bottom of
the window. Please note that it takes 10-30 seconds to format a HDD.
5. When the formatting is finished, it will display
“SUCCESS” at the bottom of the
window.
INTERNAL HDD
Select the record policy of the internal hard disk drive. By default, the hard disk
drive will overwrite from the beginning when it becomes full.
REPEAT RECORD:
It starts to overwrite the oldest data.
MANUAL:
It stops recording if the HDD is full.
DISK MONITOR
It stops automatically if a HDD failure
happens. It starts to “Monitoring” again after
a DVR reboot . (Use the [ - + ] buttons to stop or start.)
