10
20
freeze
button:
Press to freeze an image in the live or play mode.
NOTE: During the play mode, pressing the
“
freeze
”
and the
“
pause
”
buttons have different
effects. Push
“
freeze
”
to capture a particular image while the image record
continues running in the device. When you press the
“
pause
”
button, both the
particular image and the entire image record are halted.
21
search
button:
Press to enter the search mode to access recorded video.
22
(zoom)
button:
Press to double the size of an image. Use the "^" ( up ), "V" ( down ) , "<" ( left ) and ">" ( right )
buttons to shift your zoom focus . Press the zoom button again to return to the original image size.
23
channel
button:
All channel buttons from 1 to 9 are sited here. Press each to display its channel in the live and play
modes.
24
LOCK Indicator
:
The red signal denotes an operation lock.
25
T-rec Indicator:
This indicator of the timer recording mode lights up to signal the scheduled record setting is on.
26
(DISK)
Indicator:
The indicator shows the operation status of the unit
’
s har
d-disk drives. The green light indicates
the hard-disk drive is storing or retrieving data. The red light signals the hard-disk drive is filling up.
The orange light indicates the hard-disk is retrieving at disk-full status.
27
POWER
button:
Press this
button for at least 3 seconds to switch off. Press again to activate the device.
28
SD CARD
Slot
:
This is used for system software updating, archiving/accessing critical images, and to save the
whole setting.
