User manual SNC-565IR/W
_________________________________________________________________________________
- 16 -
2.6. Motion detection
The camera allows you to detect motions in four different areas. The note „MOTION
DETECTION“ is displayed on the screen once a movement has been discovered. Hence a
single person is able to efficiently monitor an area. The camera detects a motion by
difference in contour, brightness and colour.
1. Press SET:
OFF: Motion detection is switched off.
ON:
Every kind of movement is detected in the defined surveillance area.
2. Under „AREA SEL“ select one of the four surveillance areas and activate it to „ON“.
3. Use the up/down/left/right buttons to define the size of the surveillance area.
4. Press SET to save the settings.
NOTE:
Under flickering light conditions, it may happen that the motion detection function doesn’t
operate properly because the camera interprets the sudden changes in light and brightness
as object movement. The motion detection function doesn’t guarantee that fire or thefts can
be avoided. The manufacturer doesn’t assume any responsibility for any accidents or
damages.
