User Manual
SVS-3001
_________________________________________________________________________________
- 27 -
2.5.4 Event configuration
The event configuration setting can be found under the path:
Event > Event configuration.
To add an event trigger, follow these steps:
1.
Click on “Add” and the setup panel will be expanded (as shown above).
2. Give a name to this event.
3. Set the time interval between the triggers.
4. Set the time perio
d for the trigger. Choose “Always” or “During time between” or
“Never”.
5.
Triggered by: Select “motion detection” from the drop-down menu.
6. Choose the corresponding action once a motion has been detected.
7.
Click on “Save” to store the configurations.
