User manual
/ VDC-610ID
_________________________________________________________________________________
- Seite 20 -
cursor is at SAVE AND EXIT.
E-8.
AUTO SCAN
–
EXIT
To escape this page, move joystick to the right direction.
F. TOUR SET
8 Programmable tours can be set and each tour is available to set up to 64 preset steps. After setting the data
to the each tour group, 71~78 + preset buttons are working as group tour # 1~8
F-1.
TOUR SET
–
TOUR NO.
Max. 8 group tour no. set by the joystick are available.
F-2.
TOUR SET
–
TOUR TITLE
To set tour title, select up to 16 characters using Joystick to left or right.
Press ZOOM TELE button to move the next character from the left to the right direction and ZOOM WIDE
button to move the next character from the right to left direction (Space displays when
appears) Tour
title is not displayed on the monitor, but only for the reference of user.
F-3.
TOUR SET
–
TOUR STEP
Each tour group consists of up to 60 preset steps with different dwell time and speed. It is possible to
match any preset # for each tour step.
F-4.
TOUR SET
–
PRESET NO.
The decided tour step #101 ~200, it is possible to select any preset no. up to 164. The default setting is
BLK
F-5.
TOUR SET
–
DWELL TIME
Dwell time provides up to 99 seconds from 01 second. The default setting is 03 seconds.
F-6.
TOUR SET
–
SPEED
Each tour step can be set with different tour speed up to 200
°/S
and it is selectable from 10
°/S. Move
TOUR SET
TOUR NO
: 01
TOUR TITLE
: TOUR01
□□□□□□□□□□
TOUR STEP
: 01
PRESET NO.
: 01
DWELL TIME
: 03
SPEED
: 200
°
/S
SAVE
EXIT
DEFAULT SETTING
