User manual
/ VDC-610ID
_________________________________________________________________________________
- Seite 21 -
joystick to the right or left direction to select tour speed. The default setting is 200
°/S.
F-7.
TOUR SET
–
SAVE
To save the memorized data and escape this page, move joystick to the right direction when cursor is
at SAVE
.
F-8.
TOUR SET
–
EXIT
To escape this page, move joystick to the right direction
G. PRIVACY SET
Privacy function is provided by (TS-PTZ10X) model only.
4 Privacy masking zones are available to block out areas of security.
G-1.
PRIVACY SET
–
PRIVACY NOMBER.
Up to 4 privacy masking zones are available.
G-2.
PRIVACY SET
–
DISPLAY.
Move joystick to the right or left direction to set ON in order to show the selectable block in the center of
the monitor. This block appears as a translucent square with blue color after set ON. The default setting
is OFF.
G-3.
PRIVACY SET
–
ACTION (MOVE / ADJUST)
To set the blocking area, press FOCUS FAR button when the MOVE MODE is appeared. Then use the
joystick to the user defined area in order to set blocking area. Then press FOCUS FAR button again to
escape from MOVE MODE.
To adjust size of blocking area, move joystick to the right or left direction when the cursor is on ACTION.
After move mode changed to ADJUST MODE, press FOCUS FAR button in order to adjust the size of
blocking area. The size of blocking area can be adjustable by using joystick up down or left right,. After
adjusting size of blocking area, press FOCUS FAR button to escape ADJUST mode.
ADJUST: You can change the masking size by using joystick to the left or right direction
MOVE: You can move the masking area by using joystick to the left or right direction (Default)
PRIVACY SET
PRIVACY NOMBER : 01
DISPLAY
: OFF
ACTION
: MOVE
SAVE
EXIT
DEFAULT SETTING
