User manual
/ VDC-610ID
_________________________________________________________________________________
- Seite 22 -
G-4.
PRIVACY SET
–
SAVE
After setting the privacy masking zone, to save the data, move joystick to the right direction when the
cursor is on SAVE. After saving the data, the cursor moves to PRIVACY NO.2 automatically to prepare the
next privacy masking zone.
G-5.
PRIVACY SET
–
EXIT
To escape this page, move joystick to the right direction
H. PATTERN SET
8 programmable patterns are available with 16 characters of title.
After setting the data to each pattern # 1~8, 81~88+ preset buttons are working as Pattern # 1~8.
H-1.
PATTERN SET
–
PATT NO.
Up to 8 programmable user-defined patterns set by the joystick are available.
H-2.
PATTERN SET
–
PATT TITLE
To set PATTERN TITLE, select up to 16 characters using Joystick to the left or right.
Press ZOOM TELE button moves to the next character from the left to the right direction and ZOOM
WIDE button moves to the next character from the right to left direction (Space displays when
appears)
Pattern title is not displayed on the monitor, but only for the reference of user.
H-3.
PATTERN SET
–
DATA FILL
To fill the programming data, press FOCUS FAR button in order to start the data fill up. Filling data is
programmed according to the joystick movement. Press FOCUS FAR button again in order to escape.
H-4.
PATTERN SET
–
SAVE
To saving the filling data, move joystick to the right direction when the cursor is on SAVE. Then the cursor
moves to the PATT NO.02 in order to prepare next pattern no.
PATTERN SET
PATT NO : 01
PATT TITLE: PATTERN01
□□□□□□□
DATA FILL : 0%
SAVE
EXIT
DEFAULT SETTING
