User manual
/ VDC-610ID
_________________________________________________________________________________
- Seite 24 -
J. SECTOR SET
Up to 8 programmable sectors are available with 16 characters.
This feature is useful to memory the certain location such as parking zone or so on.
When camera goes through this area, it shows the letter you memorized.
J-1.
SECTOR SET
–
SECTOR NO.
Up to 8 programmable sectors set by the joystick are available.
J-2.
SECTOR SET
–
SECTOR ID
To set SECTOR ID, select up to 16 characters by using Joystick to the left or right.
Press ZOOM TELE button to move to the next character from the left to the right direction and ZOOM
WIDE button to move to the next character from the right to left direction (Space displays when
appears)
J-3.
SECTOR SET
–
SECTOR START
To set SECTOR START angle, press FOCUS FAR button then move joystick to the left or right direction to
set the position. To press FOCUS FAR button again is to escape.
J-4.
SECTOR SET
–
SECTOR END
To set SECTOR END angle, press FOCUS FAR button then move joystick to the left or right direction to
set the position. To press FOCUS FAR button again is to escape.
J-5.
SECTOR SET
–
SAVE
After setting the SECTOR position, to save the data, move joystick to the right direction when the cursor is
on SAVE. After saving the data, the cursor moves to SECTOR NO.2 automatically to prepare the next
SECTOR.
J-6.
SECTOR SET
–
EXIT
To escape this page, move joystick to the right direction
K. EXIT
To escape OSD Main Menu, move joystick to the right or left direction then this camera is ready.
SECTOR SET
SECTOR NO : 01
SECTOR ID: SECTOR01
□□□□□□□□
SECTOR START: XXX.X.XX.X
SECTOR END : XXX.X.XX.X
SAVE
EXIT
DEFAULT SETTING
Start Position
End Position
