8
818 36 43-01/7
3.
In order to push the appliance into its final position, press carefully at
the top of the door and tip the appliance back slightly. The weight is
thus transferred to the back wheels and the appliance can be easily
pushed.
4.
When the appliance is standing in the desired place, attach the plinth
cover. Make sure that the door contact (if present) is not damaged and
that it engages in the corresponding aperture in the plinth cover.
Before Use
Packaging
0
1.
Remove all adhesive tape and packaging from the interior of the appli-
ance.
3
Any remnants of adhesive can be removed with white spirit.
2.
Remove the transport protection pieces and pull off the adhesive tape.
3.
Wash the inside of the appliance with lukewarm water with a little
bicarbonate of soda added (5 ml to 0.5 litre of water). Do not use soap