9
Preparation for Work
1. After preparing the injection-extraction machine, connect the accessory to the machine, using
the machine’s vacuum and solution hose
2.
Insert the plug of the cable into a wall socket (see Safety Regulations).
3.
Put the motor switch in position “I”
4.
Act on the flow regulation valve, located on the handle tube of the accessory, in order to set the flow
to spray on carpet. The lever parallel to the handle tube corresponds to the maximum flow, for a deep
cleaning of carpet. The lever perpendicular to the handle tube corresponds to a minimal flow, useful
for a maintenance cleaning and a consequently shorter drying time.
Connection for
vacuum hose
Coupling for
solution hose
Handle tube
Spray lever
Handle
Flow regulation valve
(maintenance/deep
clean)
Vacuum head
Motor switch
Bearing for rotating
brush
Thermal protection
Brush pressure
regulation knob
Spray nozzles
