SANTOS: Instruction and Maintenance Manual
98112 EN 2.2 - 05 2014
8 / 16
www.santos.fr
Dismantling after use:
IMPORTANT:
•
In every case, the appliance should be stopped and the appliance's power
supply cord (12) unplugged
(Fig. 1)
.
1. Remove the plunger (11) and the meat pan (10) from the insertion chute of the
body of the mincer (1) (Fig. 7).
2. Unscrew the locking screw (2) (Fig. 6).
3. Remove the mincer body (1) assembly from the end piece of the motor (8).
4. Loosen and unscrew the nut (6) from the thread of the body of the mincer (1).
5. Take down the drilled disc (5), blade (4) and feed screw (3) with the friction washer
(7) (Fig. 2).
CLEANING
IMPORTANT
:
•
Stop the appliance and unplug the power supply cable.
•
Cleaning in a jet of water or a high pressure spray is
prohibited.
•
The motor unit (9) must not be immersed in water.
You are advised to clean the appliance as soon as it has finished being used.
To facilitate cleaning, do not allow foodstuff to dry in the body of the mincer (1), the
drilled disc (5), on the blade (4), or the feed screw (3).
The motor unit (9) is to be cleaned with a soft damp sponge, then dried.
MAINTENANCE
Prior to carrying out any intervention on the appliance, it must be
disconnected from the mains without fail.
Spare parts:
IMPORTANT
:
Use of spare parts other than certified original SANTOS
parts is prohibited
This appliance requires no particular maintenance because the bearings are lubricated for
life.
!
!
!