SANUPS A11H, Instruction Manual

Introduction 

Thank you for choosing the SANUPS (A11H). 

SAVE THESE INSTRUCTIONS 

This manual contains important instructions for A11H that should be followed during installation and 
maintenance of the UPS and batteries to protect the safety of the service technician* and the customers. 

To use the UPS correctly and safely, read this manual before using the UPS. After reading, please keep it 

handy for convenient reference. 
This UPS is intended for installation in a temperature-controlled indoor environment free of conductive 

contaminants. 

･

  Operating temperature: 0 to 40

ﾟ

C (32 to 104

ﾟ

F)

UPS is an abbreviation for Uninterruptible Power Supply. 

Table of contents

§1. Before Use ................................................................................................................      1 

 
§2. Safety Precautions ...................................................................................................   2 

§3. For Proper Operation...............................................................................................   6 

§3.1 UPS Input Power Supply ...............................................................................   6 

§3.2 Installation Precautions .................................................................................   6 

§3.3 Wiring Precautions .........................................................................................   7 
§3.4 Usage Precautions ..........................................................................................   7 

§4.Checking the Contents of the Package ....................................................................   8 
 

§5. External Dimensions and Part Names ...................................................................   9 

§5.1 Front and Back Panels of UPS.......................................................................   9 
§5.2 Control Panel and Indicators ........................................................................   10 

§5.3 External Interfaces .........................................................................................  11 

 
§6. Wiring . ....................................................................................................................   15 

§6.1 Battery Connector Connection ......................................................................    15 

§6.2 Connecting Optional Equipment...................................................................   17 
§6.3 Input Plug Connection...................................................................................   18 

§7. Procedure Until Load Device Operation ................................................................   20

§8. Preparation Before Operation ................................................................................   21

§8.1 User Setting Check........................................................................................   21 
§8.2 UPS Charge....................................................................................................   22 

§8.3 Outage Simulation Test.................................................................................   23 

§9. Load Devices Connection........................................................................................   25 
 

§10. Installation............................................................................................................   26 

§10.1 Checking Before Installation.......................................................................    26 

§10.1.1 Installation Environment Check .........................................................   26 

§10.1.2 Installation Space Check .....................................................................   26 

§10.1.3 Setting Check .......................................................................................   27 

§10.2 Installation...................................................................................................   28 

§11. Operating Procedures ...........................................................................................   29 

§11.1 UPS Startup .................................................................................................   29 

§11.2 UPS Shutdown (Daily).................................................................................   31 

§11.3 UPS Shutdown (If Not to Be Used for More Than a Week) .......................     32

This term is used to indicate service technicians from SANYO DENKI or entrusted from SANYO DENKI 
with knowledge of this UPS. 
Maintenance work must not be performed by other than a qualified service technician. 

* Service technician