11
4. Place the wall plate template
10
at your desired height and position the slotted holes over your stud center lines. Level the wall plate
template
10
and tape in place.
IMPORTANT
:
Be sure you mark and drill into the center of the stud.
5. Drill the four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT
:
Pilot holes must be drilled to a depth of 3 in. (75 mm).
10
10
12
4
5
3 in. (75 mm)
7/32 in.
(5.5 mm)
Summary of Contents for BML1
Page 29: ...29 ...
