14
4. Place the wall plate template
10
at your desired height and position the MIDDLE HOLES over your stud center lines. Level the wall plate
template
10
and tape in place.
CAUTION:
Avoid potential personal injury or property damage! You MUST install using the center holes in the stud as shown
IMPORTANT
:
Be sure you mark and drill into the center of the stud.
5. Drill the middle two pilot holes (into the stud) using a 7/32 in. (5.5 mm) diameter drill bit.
IMPORTANT
:
Pilot holes must be drilled to a depth of 3 in. (75 mm).
10
10
12
4
5
3 in. (75 mm)
7/32 in.
(5.5 mm)
Summary of Contents for BML1
Page 29: ...29 ...
