15
6. Remove the wall plate template
10
.
7. Install the middle two lag bolts
13
(into the stud), and firmly tighten until they are pulled flush against the wall plate
11
.
CAUTION:
Avoid potential personal injury or property damage! Both lag bolts
13
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
11
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
CAUTION:
Avoid potential personal injury or property damage! The middle two lag bolts MUST be installed into a wood stud – this
product was not designed to be used in drywall alone.
Go to STEP 3 on PAGE 22.
13
10
11
6
7
Summary of Contents for BML1
Page 29: ...29 ...
