background image

6901-002027 <00>

2

IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS - PLEASE READ ENTIRE MANUAL BEFORE USING THIS PRODUCT

Thank you for choosing a Sanus Foundations Component Series Rack. The CFR518, CFR524, and CFR535 are designed to support audio/video equipment. 

 

Ù

The total weight capacity for the CFR518 is 453.6 kg (1,000 lbs).

 

Ù

The total weight capacity for the CFR524 is 453.6 kg (1,000 lbs).

 

Ù

The total weight capacity for the CFR535 is 453.6 kg (1,000 lbs).

 CAUTION:

CAUTION: Avoid potential personal injuries and property damage!  

 

Ù

Do not use this product for any purpose not explicitly specified by Sanus Systems. 

 

Ù

If you do not understand these instructions, or have doubts about the safety of the installation, assembly or use of this product, contact Sanus Systems 

Customer Service or call a qualified contractor.  

 

Ù

Sanus Systems is not responsible for damage or injury caused by incorrect assembly or use.  

 WARNING:

WARNING: Avoid potential personal injuries and property damage!  

 

Ù

Do not exceed the stated weight capacities.

 

Ù

Do not shake, tilt, rock, sit, stand, or climb on your Component Series Rack. Tipping may cause injury or death. 

 

Ù

Do not move large racks by yourself; due to weight and height, assistance is required. 

Summary of Contents for CFR518











Reviews: