11
.
WELCOM
E! THANKS
FOR
CHOOSING
SANUS VU
EPOINT.
THIS IS GO
ING TO BE
EASY!
LET’S GET
STARTED.
STEP 1
Attach TV bracke
ts to back of TV
.
STEP 2
Attach wall plate
to wall using
provided hardware.
STEP 3
Hang TV on
arm.
Our live, US-based
install
experts are s
tanding by to
help.
Call us at:
Or, chat at:
Get it right the
rst time!
HeightFi
nder
™
shows you
where to
drill.
Use it now
at:
Want to watch
a video th
at
shows how
easy thisis?
Watch it no
w at:
3. Drill pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove template
1
8
IMPORTANT
: Be sure to drill into the center of the stud.
IMPORTANT
: Pilot holes must be drilled to a depth of 2 ¾ in. (70 mm).
4. Install full motion arm
1
9
using two lag bolts
2
0
. Tighten the lag bolts only until they are pulled firmly against the wall plate.
CAUTION:
Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
.
7/32 in.
(5.5 mm)
2
¾
in. (70 mm)
4
3
2
0
2
0
1
8
1
9
