12
1.
Position the template
1
8
on the wall at your desired height. Level the template and mark the hole locations.
2.
Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT:
Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
.
.
1
8
2
1
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service
at 1-888-333-9952 to have the additional
hardware shipped directly to you.
STEP 2B Attach Wall Plate to Wall
Solid Concrete / Concrete Block Installation
3/8 in.
(10 mm)
3 in. (75 mm)
CAUTION:
Avoid potential personal injury or property damage!
●
Mount wall plate assembly
1
9
directly onto concrete surface (no wall covering)
●
Minimum
solid concrete
thickness: 8 in. (203 mm)
●
Minimum
concrete block
size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
1
8
