12
1. Position the template
07
on the wall at your desired height. Level the template and mark the hole locations.
2. Drill two pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT:
Pilot holes must be drilled to a depth of 3 in. (75 mm). Never drill into the mortar between blocks.
2
1
Concrete Installation Kit CMK1 is not included
(see page 5) Contact Customer Service at
888-384-1115 to inquire about the additional
hardware.
STEP 2B Attach Wall Plate to Wall
Solid Concrete / Concrete Block Installation
3/8 in.
(10 mm)
3 in. (75 mm)
CAUTION:
Avoid potential personal injury or property damage!
●
Mount arm assembly
08
directly onto concrete surface (no wall covering)
●
Minimum
solid concrete
thickness: 8 in. (203 mm)
●
Minimum
concrete block
size: 8 x 8 x 16 in. (203 x 203 x 406 mm)
07
07
