9
4
3
19
20
21
18
3. Drill four pilot holes using a 7/32 in. (5.5 mm) diameter drill bit. Remove wall plate template
18
.
IMPORTANT
: Be sure to drill into the center of the studs.
IMPORTANT
: Pilot holes must be drilled to a depth of 3 in. (75 mm).
4. Install wall plate
19
using four lag bolts
20
and four washers
21
. Tighten the lag bolts only until they are pulled firmly against the wall
plate
19
.
CAUTION:
Avoid potential personal injury or property damage! All four lag bolts
20
MUST BE firmly tightened to prevent unwanted
movement of the wall plate
19
. Ensure the wall plate is securely fastened to the wall before continuing on to the next step.
3 in. (75 mm)
7/32 in.
(5.5 mm)
Summary of Contents for OLT15
Page 19: ...19 ...