6
Instruction Manual for HRV
1-888-726-8869
www.sanuvox.com
OPERATION
How to Operate your Product
The HRV is a unit that starts as soon as it’s installed and plugged in.
CAUTION:
The suggested operating temperature range is 10 to 50°C (50 to 122°F). Operating the HRV outside this range
will result in decreased performance. For optimal performance, air temperature moving through the reaction chamber should be
in the range of 15 to 20°C (60 to 70°F).
How to Read the Signal Lights (LED)
The HRV’s Signal Lights (LED) will give you real time status update about your unit.
LED ON:
Oparating, “Default settings”.
AMBER LED OFF:
Lamp failure.
RED LED OFF:
Ballast failure.
LED OFF:
No power or unit failure.
Lamp Ballast
MAINTENANCE
How to Replace the Lamp
Replacing the lamp on the HRV is quick and easy. Simply turn off the power source, remove unit from duct, remove and dispose
of old lamp, replace with new Sanuvox branded UV lamp, replace unit in duct and turn power source back on. See below for
detailed step by step instructions.
CAUTION: In order to avoid reduced performance of the lamp, do not touch lamp glass without gloves.
Step by Step Lamp Replacement
1. Separate the assembly (ballast, access plate and lamp) from the
reflector aluminum tube by turning the 4 screws located at the 4 corners
of the unit access plate.
CAUTION:
Before installing or performing maintenance on the unit
or system, TURN OFF AND DISCONNECT the unit or system from
all power sources (there may be more than one switch to disconnect).
STEP 1
