7
Instruction Manual for HRV
1-888-726-8869
www.sanuvox.com
3. Prepare the new lamp.
Remove the contents from packaging. Only
after you have visually inspected the UV lamp should you break the
security seal on the underside of the cardboard sleeve.
2. Remove the old UV lamp from the lamp socket by opening the retaining
clamp.
NOTE: UV lamps can be disposed/recycled after use, as any other
fluorescent lamps. Contact and follow your local and national authorities’
specific instructions.
STEP 3
STEP 2
STEP 4
4. Carefully slide the new
UV lamp
out from the cardboard sleeve. Be sure
to wear the cotton gloves (included) guaranteeing a clean lamp free
from fingerprints. Fingerprints on the lamp will negatively impact the UV
output of the lamp.
7. Once the UV lamp is installed, reinstall the assembly in the reflector tube
and plug in your unit.
STEP 7
5. While holding the porcelain end-cap (with 4 pins) in the clamp, carefully
push the white connector onto the four pins. The plug is designed so
that it can only be installed one way. You may have to rotate the socket
90° to line up the pins with the holes. The connector will fit into position.
NOTE:
Too much force applied from the opposite end-cap may break
the lamp.
6. Slide the UV lamp porcelain end-cap
through the clamp. Once the UV
lamp is inserted, release the clamp to fix the lamp in place.
STEP 5
STEP 6
