background image

3

 

WARNING

 

Before installing or performing maintenance on the unit, TURN OFF and disconnect unit from power source. 

Electrical shock may cause personal injuries or possibly death.

Never expose eyes or skin to ultraviolet light from any source. he UV puriier MUST be DISCONNECTED 

from power source before performing maintenance of service. Personal injury may result.

Do not touch lamp glass without gloves. Reduced performance of lamp may result. Clean lamp ater handling.

he UV lamp contains a small quantity of mercury. If a lamp breaks, clean and dispose of with care.

Use only speciied replacement lamps with your unit. Use of an incorrect lamp can result in damage  

to the unit and/or lamp and will also void the warranty.

When applicable local regulations comprises more restrictive installation and/or certiication requirements,  

the aforementioned requirements prevail on those of this document and the installer agrees to conform to these 

at his own expense.

When performing installation, servicing or cleaning the UV puriier, it is recommended to wear safety glasses 

and gloves.

IMPORTANT SAFETY INSTRUCTIONS

 

NOTICE 

UV lamp can be disposed / recycled ater use as any other luorescent lamp.  

Contact and follow your local and national authorities’ speciic instructions.

  

 

Component Warranty

UV lamp 

3 years

Ballast 

3 years

Electronics (circuit board) 

3 years

WARRANTY 

he warranty applicable to the diferent components included in your purchase are as per the table below:

Make sure to keep a copy of your proof of purchase in order for the warranty to be valid.

Summary of Contents for SRMax









Reviews: