Page 24
[[PROgRaMMing MEnUS
04.cURvE (EXPOnEnTiaL anD aRc aDjUSTMEnT, cOnTinUED....)
Choosing the Channel
Exponential or Adjustable Rate Control percentage values can be adjusted from Mild through Linear to Quick to allow you to set
the most effective control response for your model. For example, if your model over-steers, reduce the Steering Exponential or
Adjustable Rate Control percentage value, and if your model under-steers, increase the Steering Exponential or Adjustable Rate
Control percentage value. As another example, reduce the Throttle Exponential or Adjustable Rate Control percentage value on a
slippery track or with a model that has a higher-torque motor or engine, and increase the Throttle Exponential or Adjustable Rate
Control percentage value on a high-grip track or with a model that has a lower-torque motor or engine.
The Exponential and Adjustable Rate Control functions work the same, except the Exponential Rate percentage value is
programmed from a fixed Neutral Point of 50% and the Adjustable Rate Control Rate percentage value is programmed
from a user-adjustable Neutral Point, giving you even greater programming control.
1) From the Top Screen, press the ENTER key to open the Programming Menu list.
2) Scroll UP or DOWN to highlight the CURVE menu, then press the ENTER key. The
CURVE menu will be displayed and the cursor will default to [ST].
3) Scroll DOWN to move the cursor to the channel you would like to make programming
value changes to. Choose from <CURVE> [ST] (Steering), <CURVE> [TH] (Throttle),
<CURVE> [A1] (Auxiliary 1) or <CURVE> [A2] (Auxiliary 2).
Choosing the Curve Type
1) Press the ENTER key to highlight TYPE EXP. Press the ENTER key a second time, then
scroll UP or DOWN to choose the desired Curve Type. If you are programming the Curve
function for the Throttle channel, you have the option of adjusting the Curve Type for the
Throttle High Side (TYPE-H) and the Throttle Brake Side (TYPE-B) independently.
CURVE TYPE setting range is EXP and ARC. The default setting is EXP.
Fixed Neutral Point
Fixed Neutral Point
Summary of Contents for MT-4
Page 1: ...OPERATING MANUAL ...
