Sanwa MT-4, Operating Manual

Page 3

Additional 2.4GHz receivers can be purchased and paired with the MT-4 transmitter through the Binding operation. Due 

to differences in the implementation of 2.4GHz technology among different manufacturers, only SANWA brand 2.4GHz 

FHSS-2, FHSS-3 and FHSS-4T surface receivers are compatible with your radio control system. 

Telemetry functions are available 

only when used with Telemetry-capable receivers

.

We appreciate your purchase of the new SANWA 

MT-4 2.4GHz FHSS-4T

 radio control system. This Operating Manual is 

intended to acquaint you with the many unique features of your state of the art Telemetry-capable radio control system. Please 

read this operating manual carefully prior to use so that you may obtain maximum success and enjoyment from the operation of 

your new radio control system.
The 

MT-4 2.4GHz FHSS-4T

 radio control system has been designed for the utmost in comfort and precise control of all types of 

model cars and boats. We wish you the best of success and fun with your new purchase!

This is a high-output full-range radio control system that should well exceed the range needed for any surface model. For 

safety, the user should perform a range test at the area of operation to ensure that the radio control system has complete 

control of the model at the farthest reaches of the operational area. Rather than operating the model, we recommend that the user 

enlist the help of a fellow modeler to walk the model to the farthest reaches of the track (or for boats, to walk the shore line well in 

excess of the operational distance of the boat), then test for proper operation.

This radio control system operates on the 2.4GHz frequency band. The 2.4GHz connection is determined by the transmitter 

and receiver pair. Unlike ordinary crystal-based systems, your model can be used without frequency control.



  Be certain to read this Operating Manual in its entirety.



  'Safety First' for yourself, for others, and for your equipment.



operate your radio control equipment.



  If at any time during the operation of your model, should 

you feel or observe erratic operation or abnormality, end 

your operation as quickly and safely as possible. DO NOT 

operate your model again until you are certain the problem 

has been corrected. TAKE NO CHANCES.



  Your model can cause serious damage or injury, so please 

use caution and courtesy at all times.



  Do not expose the radio control system to water or excessive 

moisture.



  Waterproof the receiver and servos by placing them in a 

water-tight radio box when operating R/C model boats.



  If you have little to no experience operating R/C models, we 

strongly recommend you seek the assistance of experienced 

modelers or your local hobby shop for guidance.



  The Low Voltage Alarm will sound when the transmitter 

battery voltage drops to the minimum threshold. If this 

occurs,  stop  using  the  transmitter  as  soon  as  possible, 

then replace or recharge the transmitter battery.

GENERAL

INTRODUCTION

SAFETY

Observe all the rules of the field, track, or lake where you