Sanwa MT-4, Operating Manual

Page 5

Transmitter
Model: MT-4 Telemetry System
Output Power: 100mW
Nominal Input Voltage: 4.8v ~ 7.4v
Operating Voltage Range: 4.0v ~ 9.6v
Dry Weight: 13.68oz (388gr)
Frequency: 2.4GHz FHSS-4T

Receiver
Model: RX-461 Telemetry
Frequency: 2.4GHz FHSS-4T
Nominal Input Voltage: 4.8v ~ 7.4v
Weight: 0.34oz (9.6gr)
Dimensions: 1.43 x 1.04 x 0.64in (36.2 x 26.5 x 16.3mm)
Fail Safe Limit: 

3.5v ~ 7.4v (FH4T) / 3.5v ~ 5.0v (FH2/FH3)

Torque:  80oz/in (5.8kg/cm @ 4.8v)

89oz/in (6.4kg/cm @ 6.0v)

Speed:  0.10 sec/60º @ 4.8v

0.08 sec/60º @ 6.0v

Dimensions:  1.59 x 0.83 x 1.04in

   (40.4 x 21.1 x 26.4mm)

Weight:  1.77oz (50gr)

Torque:  50oz/in (3.6kg/cm @ 4.8v)

61oz/in (4.4kg/cm @ 6.0v)

Speed:  0.17 sec/60º @ 4.8v

0.14 sec/60º @ 6.0v

Dimensions:  1.54 x 0.79 x 1.42in

   (39.1 x 20.0 x 36.0mm)

Weight:  1.55oz (43.9gr)

SDX-901 Digital High-Power Metal Gear Dual Ball Bearing Servo

Torque:  361oz/in (26.0kg/cm @ 4.8v)

423oz/in (30.5kg/cm @ 6.0v)

Speed:  0.19 sec/60º @ 4.8v

0.15 sec/60º @ 6.0v

Dimensions:  1.60 x 0.83 x 1.50in

   (40.6 x 21.1 x 38.1mm)

Weight:  2.33oz (66gr)

SDX-1322 Digital Standard Ball Bearing Servo

Both analog and digital servos will work with your 

MT-4 2.4GHz FHSS-4T

 radio control system. To get the most out of your 

experience, we recommend the use of digital servos in SHR or SSR mode. For more information about using different types 

of servos and the different Servo Mode Types, see the 

Changing the Mode Setting

 section on page 55. 

Torque:  124oz/in (8.9kg/cm @ 4.8v)

151oz/in (10.9kg/cm @ 6.0v)

Speed:  0.17 sec/60º @ 4.8v

0.13 sec/60º @ 6.0v

Dimensions:  1.54 x 0.78 x 1.50in

   (39.0 x 20.0 x 37.4mm)

Weight:  1.93oz (56gr)

SDX-772 Digital High-Power Metal Gear Dual Ball Bearing Servo

We recommend using SANWA brand servos with your 

MT-4 2.4GHz FHSS-4T

 radio control system. These are a few of our 

more popular servos.



  4-Channel 2.4GHz FHSS-4T Digital High-Response Computer Radio with Advanced Programming



  Telemetry System Features Updated Temperature, RPM/Speed and Voltage Displays in Real-Time on the Telemetry Screen

  

High-Power FHSS-4T Technology Provides the Best Reception and Connectivity, Giving Racers Added Assurance



  4-Cell Battery Holder for Lighter Weight - Also Accepts Optional Ni-Cd/MH Batteries or 2S Li-Po or 2S Li-Fe/A123 Battery Packs



  Adjustable Grip



  Variable Rate Adjustment



  Model Naming



  Model Select



  Model Select Shortcut (Direct Model)



  Model Clear



  Selectable Modulation Type



  Multi-Function LCD Contrast



  Adjustable Key Volume and Tone



  Programmable Low Voltage Alarm



  Inactivity and Over Voltage Alarms



  Digital Battery Voltage Monitor



  18 Model Memory



  Telemetry Logging



  Channel Set Menu



  Servo Reversing



  Steering, Throttle and Brake Dual Rate



  End Point Adjustment 



  Exponential and ARC Adjustment



  Servo Speed Adjustment



  Anti-Lock Braking



  Throttle Offset



  Lap and Interval Timers



  Total, Best and Individual Lap Display



  Four Wheel Steering Mixing



  Dual Throttle Mixing w/Dig & Burn 

 

Normal, SSR and SHR Servo Modes



  Center or Parallel Trim Types



  Step Auxiliary



  Point Auxiliary



  Auxiliary Mixing



  Programmable Fail Safe



  Receiver Battery Voltage Fail Safe



  Digital Trims



  Servo Sub-Trim



  Adjustable Throttle Trigger



  Programmable Switches, Lever and Dial



  Adjustable Steering Wheel

GENERAL

FEATURES AND SPECIFICATIONS

SYSTEM FEATURES

SYSTEM SPECIFICATIONS

SERVO RECOMMANDATIONS

SDX-801 Digital High Metal Gear Low-Profile Dual Ball Bearing Servo