Maintenance
Safety, Operation and Maintenance Manual - Aug 2012
5-46
SY115C9/135C/155H Crawler Hydraulic Excavator
3. Place a metal stick against one end of the
pin (1) and hammer the metal stick in order
to drive the pin (1) out and remove the
bucket tip (2).
Remark:
●
The metal stick shall have a smaller diam-
eter than the pin.
●
If the tip cannot be removed safely in this
way, consult Sany distributor for replace-
ment.
4. Remove the tip and check the latch for
any damage. Replace it if necessary.
The latches and tips worn short must be
replaced with new ones.
5. Clean the installation surface. Mount the
new bucket tip (2) to its adapter. Push part
of the pin (1) into the tip and hammer it in
completely in order to lock the bucket tip
onto its adapter.
1
2
CZ335-1104025
2
1
CZ335-1104026
No.
Item
No.
Item
1
Bucket
8
Latch
2
Plate
9
Bush
3
Plate
10
Bolt
4
Plate
11
Washer
5
Adaptor
12
Spacer
6
Tip
13
Side cutter (left)
7
Pin
14
Side cutter (right)
1
3
9
13
5
6
7
2
4
10
11
12
14
8
CZ135B-1104009
Fig. 5-34
Fig. 5-35
Fig. 5-36
Table 5-9