Safety
Safety, Operation and Maintenance Manual - Sep 2012
2-24
SY115C9/135C/155H Crawler Hydraulic Excavator
2.3.9 Handholds and steps
To avoid personal injury caused by slippery
handholds or steps, observe the following in-
structions:
●
Before mounting and dismounting, check
the handholds and steps (including tracks)
for oil, grease or mud. Always keep them
clean. Make necessary repairs and tighten
loose bolts if any.
●
When mounting and dismounting the
machine, use the handholds and steps
marked by the arrows.
●
Face the machine and maintain a 3-point
contact with the handholds and steps (in-
cluding tracks) . A 3-point contact can be
both feet and one hand, or both hands and
one foot.
●
Never use any control lever as a handhold
when mounting or dismounting the ma-
chine.
●
Never carry tools when mounting or dis-
mounting the machine.
●
Never work on an engine hood or cover
with no non-slip mat on it.
●
Always face the machine when you mount
or dismount the machine.
●
Never jump onto/off the machine. Never
mount a moving machine. Never jump onto
the machine and try to stop it.
●
When you enter and exit the operator cab,
make sure the cab is on the central line of
undercarriage.
CZ335-1102008
CZ335-1102009
CZ335-1102010
Fig. 2-28
Fig. 2-29
Fig. 2-30
