SY265C LC/SY265C LR Excavator OMM
3-12
Operation and Maintenance Manual — 0420
SANY
Pattern Change (SAE/BHL) Valve
The pattern change SAE (Society of Automotive
Engineers)/BHL (Backhoe Loader) valve (1) is behind the
left front access door. See “Opening the Left Access
Doors” on page 4-10.
The pattern change valve changes control of the boom and
arm from one joystick to the other.
To change the operating mode, pull up on the pin (3) and
rotate the bar (6) 90°. Release the pin into the hole (2) to
lock the bar in place:
•
In SAE mode (position 1) (5), the arm is controlled
using the left joystick, and the boom is controlled
using the right joystick.
NOTE:
See “SAE Mode” on page 3-10 for
additional information.
•
In BHL mode (position 2) (4), the arm is controlled
using the right joystick, and the boom is controlled
using the left joystick.
NOTE:
See “BHL Mode” on page 3-11 for additional information.
NOTICE!
Shut the engine down before adjusting the pattern change (SAE/BHL) valve. Failure to do so
can damage the machine, personal property, or cause the machine to operate improperly.
Fig. 3-11
0005246
1
Fig. 3-12
0005248
3
6
4
5
2
Summary of Contents for SY265C LC
Page 2: ...Page Intentionally Blank ...
Page 287: ...Page Intentionally Blank ...
